Testo Germany has launched Saveris™, Saveris is the first fully automated temperature and humidity recording system using wireless and/or Ethernet as communications medium.
Saveris™ is designed to continuously record, document and alarm (relay, sms, email) on exceeded limit values.
To speak to us about the testo Saveris range, please email Chris Tomanek
For additional information and resources please visit the testo Saveris web page
testo Saveris overview
Components
testo Saveris radio probe
The testo Saveris radio probes measure temperature and humidity. In the measuring cycle, the probes save the recorded measurement data and send it to the central base at regular intervals. If a limit value is exceeded, a radio link is established immediately. Through bidirectional transmission, the radio probe and the base are in mutual contact. This therefore ensures that the measurement data is only recorded by the base and is not interfered with by other radio systems.
testo Saveris Ethernet probe
In addition to the radio probes, probes can be used that are directly connected to the Ethernet. The existing LAN infrastructure can be used through this. This allows the data transfer from the probe to the base, even over long distances.
Through the connection of a converter to an Ethernet jack, the signal of a radio probe can be converted into an Ethernet signal. This combines the flexible connection of the radio probe with the use of the existing Ethernet even over long transmission paths.
testo Saveris base
The base is the heart of testo Saveris and can save 40,000 readings per measurement channel independent of the PC.
The system data and alarms are visible via the display of the Saveris base. Even without the PC running, the base issues an alarm by means of an LED if the limit value is exceeded, or optionally via SMS and via a relay output to which an alarm transmitter can be connected.
In total, a base can incorporate 150 radio and Ethernet probes or 254 measurement channels.
testo Saveris software
The measurement data is transmitted from the base to a PC on which the testo Saveris software is installed within just a few minutes using an installation wizard.
All measurement are saved centrally in the software’s database and can be called up any time as a table or a graphic. All alarms that occur are listed in a table as a history. The automatic creation of PDF reports in defined intervals also simplifies the documentation. Using the calendar function and the consolidation of probes into groups, the operation of the software is simple and intuitive.
