Melt Pressure Transducer - Cleaning Tool
Gefran Melt Pressure Transducers: Cleaning Tool
Stock Code:
SKU: product options

Transducer cleaning tool

Ideal to clean Gefran transducers before installation:
Hard metal cutting tool specially designed to remove residual working materials.

Available in the following versions:

  • CT12 1/2-20UNF housing (unitemp code: UCGP-CT12)
  • CT18 M18x1,5 housing (unitemp code: UCGP-CT18)
Custom Product Options
Pick your custom options from the list below and click "Add To List".
Please select the correct sized tool for your melt pressure transducer hole.

Recommended procedure

The procedure must be conducted with the material in fluid state.

  1. Insert the tool in the housing and screw down the cutting rod (normally a 1/4 turn at a time).
  2. Turn the pilot cutter clockwise until there is no resistance to cutting.
  3. Repeat the procedure until the housing is completely clean. For constructive reasons, the maximum torque applicable to the cutter is 5 Nm (1.5 Kgm). If the hole blockage requires higher torque for removal, use the drilling kit and follow the recommended procedure.

The cleaning tool is available in the following versions:

- CT12 1/2-20UNF housing (unitemp code: UCGP-CT12)
- CT18 M18x1,5 housing (unitemp code: UCGP-CT18)

Below is a list of tags that have been applied to this product. Clicking on a tag will display a list of all products with that tag applied.