This versatile instrument is designed to accept standard 4-6 wire bridge type load-cell inputs directly.
Common applications include: force, torque, load, strain and pressure measurement.
It also comes in a hassle-free DIN-rail mountable case with a built-in LCD display for simple operator interface.
- 5 buttons
- 2 x 8mm, 8-digit LED display
- 35mm DIN rail case
(H x W x D) 101 x 45 x 119.5mm
The Texmate SC-WEI weighing/ load-cell controller features:
- 4-wire or 6-wire strain gauge input, 1-5mV/V
- Input signal averaging
- Ideal for force, torque, load, strain and pressure measurement
- Includes batch, tare and auto zero maintenance features, plus one user programmable front-panel button
- Precalibrated for 0-10,000 counts (2mV/V sensor gain at full scale). Key-in recalibration (no input signal needed)
- Dual display rows with customisable display sources
- Simple, intuitive interface with scrolling text prompts
- Security PIN protected setup and setpoint access
The Texmate SC range features a broad spectrum of versatile instruments that are ideal for either stand-alone control or as an interface to a PLC.
Measuring in at 10cm high and under 5cm wide, these compact controllers are hassle-free to install, with an easy snap-on clip for a 35mm DIN rail.
Unlike many competing DIN-rail systems, they also feature a built in 2 x 8-digit LCD display for simple operator interface.
All SC units come standard with 2 relays (5A Form A), and have the option of adding 1 serial port (RS232/485) and up to 2 analogue outputs (single 4-20mA/0-10V, or dual 4-20mA for selected models).
Input signal | 4/6-wire strain gauge, 1-5mV/V |
| Excitation | 5V DC (powers up to 8 x 350? loadcells) |
| Sampling rate | Up to 50Hz |
| Resolution | 18-bit |
Accuracy | 0.005% of reading |
| Temp. drift | Typically 3ppm/°C |
| Relay outputs | 2 x 5A form A relays |
- Optional - | |
| Analog output | Isolated 16-bit 4-20 mA or 0-10V output |
| Serial port | Front panel isolated RS232/485 |