Elstein HTS: Ceramic Infrared Panel Heaters
More Information
Elstein HTS Ceramic Infrared Heaters
Elstein HTS high temperature radiators are ceramic infrared panel radiators, which can be used for operating temperatures up to 860 °C and surface ratings up to 64 kW/m².
Elstein HTS high temperature radiators are available in four designs and cover the power range from 60 W to 1000 W.
contact us to discuss your requirements.
Features of HTS IR Panel Radiators
HTS series radiators are produced using a hollowcasting ceramic process and are filled with thermal insulation material. This improves the radiant power output to the material to be heated. Furthermore, there is a significant reduction in heat dissipated in the wiring space, so that additional insulation of the heating area is usually not required.
Compared with IR radiators, which are produced using full-poured casting processes, HTS radiators have a considerably reduced heating-up time and, depending on the type of application, enable energy savings of up to 25 %.
Our standard range consists of:
|
Elstein HTS/1: Ceramic Infrared Panel Radiator |
Elstein HTS/2: Ceramic Infrared Panel Radiator |
|
| Dimensions | 250mm x 62.5mm | 125mm x 62.5mm |
| Power at 230V ac | 250 - 1000W | 125 - 500W |
| Weight | 220g | 125g |
| Surface Rating | 16.0 | 25.6 | 38.4 | 51.2 | 64.0 kW/m² | |
| Typical operating temperature | 450 | 570 | 700 | 810 | 860 °C | |
| Maximum permissible temperature | 900 °C | |
| Wavelength range | 2 - 10 μm | |
| Standard design specifications | Operating voltage 230 V Ceramic hollow casting Integrated thermal insulation Leads 85 mm Elstein standard socket Mounting set |
|
| Optional Thermocouple | Designation T-HTS, T-HTS/1, T-HTS/2, T-HTS/4 Integrated thermocouple Type K (NiCr-Ni) TC leads 100 mm |
|
| Custom variations | Special wattages
Special voltages Extended leads Leads with ring terminals |
|
Temperature Range & Radiant Power Elstein HTS IR Panel Radiators
 |
 |
Elstein HTS Series IR Panel Radiators: Dimensions
The power can be controlled using thermocouple radiators together with temperature controllers, thyristor switching units and other accessories. IR radiation areas can be assembled using reflectors, construction sets, construction elements, mounting sheets as well as construction panels.
The national safety regulations must be complied with for the respective application, for example, the IEC or
EN standard 60519-1, Safety in electrical heating installations.
Our instructions for mounting, operation and safety must be observed.
Typical industrial applications for ceramic infrared heaters
Infrared heat is an excellent non-contact heat source and is thus used in applications involving delicate surfaces, for pre-heating, softening, curing and drying.
